Kegco 24" Wide Cold Brew Coffee Single Tap Black Commercial Built-In Right Hinge Kegerator
Serve your coffee with the best undercounter coffee dispenser on the market! The HK38BS series is equipped with a powerful compressor that delivers unprecedented cooling for fast recovery and temperature pulldown. This Javarator has a wide temperature range that can be set between 32°F and 59°F, allowing you to serve your nitro coffee at the right temperature. From the versatile design to the easy-to-use controls to the quality dispense system, we've thought of everything to ensure that this keg cooler is exactly what you need to complete your coffee bar, kitchen, or man cave.
This Javarator comes complete with everything you need to dispense cornelius kegs of iced coffee, making it even more convenient - and more fun! - to store, refrigerate, and dispense a refreshing glass of chilled coffee. It includes a draft tower with a stainless steel faucet and fittings to ensure a sanitary environment for your cold brewed coffee. Also included are a set of ball lock keg couplers for Cornelius home brew kegs, a dual gauge nitrogen regulator, and an empty 15 cu. ft. nitrogen tank with sleek black epoxy finish.
Features:
-
Includes a brand new 15 cu. ft. Aluminum Nitrogen Tank with Sleek Black Epoxy Finish
This tank is produced from high strength, corrosion-resistant aluminum alloy 6061-T6. The eye-catching sleek black epoxy finish acts as an extra layer of protection against corrosion and wear, and the aluminum construction is lighter weight than steel tanks and does not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. (5.5" diameter, 18.25" Height).
-
Includes a Dual Gauge Nitrogen Regulator
This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components, an integral safety pressure relief valve that releases at 45 PSI, and a shut-off valve that allows you to instantly shut off pressure to the keg. A large pressure adjustment knob makes it easy to adjust the pressure by hand without requiring a screwdriver.
-
Includes 5 feet of 5/16" I.D. Air Line Assembly with 2 Snap Clamps
Standard 5 foot length of 5/16" I.D. Blur Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two plastic snap clamps with a reusable clamp design.
-
Includes Ball Lock Home Brew Keg Couplers
This set includes both a gas in and beer out coupler that works with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
-
Includes a Kegco Exclusive 14" tall, 3" diameter Stainless Steel Draft Tower
The tower is a commercial grade single column, single faucet, 3" diameter stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 feet of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
-
Keg Storage Capacities:
- All dispensing accessories are UL recognized components
- Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
- Large enough to hold most full size kegs, including Coors and Miller. Interior height is a limitation, so kegs that are taller than the standard half barrel (23.25") may not fit with the keg coupler installed. We have run into this issue with certain German kegs along with the M system coupler, but most major brands in D and S System kegs will not be an issue.
-
PLEASE NOTE: Will not hold 50L European kegs
- Holds (1) full-size keg, (2) quarter slim kegs, (3) 5 gallon commercial kegs, or (3) 5 gallon home brew kegs
- Sleek black cabinet with stylish stainless steel door
- Digital temperature control keeps temperature between 32-59 degrees Fahrenheit
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
- A perfect option for dispensing beer, soda, kombucha, wine or cold brew coffee
- Stainless steel guard rail helps prevent mugs and glasses from sliding off
- Stainless steel interior is more durable than the plastic liner found in most kegerators
- Plugs into standard home outlet
Specifications:
| Dimensions |
| Height |
34-1/8" |
| Width |
24" |
| Depth |
25" (without Handle) |
| Weight |
| Unit Weight |
96.8 lbs. |
| Shipping Weight |
150 lbs. |
| Warranty |
| Labor |
1 Year |
| Parts |
1 Year |
| Compressor (Parts Only) |
5 Years |
| Key Features |
| Built-in Capable |
Yes |
| Security Lock |
Yes |
| Keg Coupler |
Yes |
| Regulator |
Yes |
| CO2 Tank |
Nitrogen Tank |
| Cleaning Kit |
Optional Add-On |
| Outdoor Use |
No |
| Commercial Use |
Yes |
| Keg Storage Capacities |
| Full Size / 1/2-Barrel |
Holds 1 |
| Pony Size / 1/4-Barrel |
Holds 1 |
| 1/4-Barrel Slim |
Holds 1 |
| 1/6-Barrel |
Holds 3 |
| 5 gal. Ball/Pin Lock Keg |
Holds 3 |
| 5-Liter / Mini Keg |
Holds 3 |
| Exterior |
| Cabinet |
Black |
| Drip Tray |
Yes |
| Guard Rail |
Yes |
| Casters |
Yes |
| Draft Beer Tower |
| Number of Faucets |
1 |
| Material |
Stainless Steel |
| Height |
14" |
| Diameter |
3" |
| Door |
| Color / Material |
Stainless Steel |
| Number of Doors |
1 |
| Door Handle |
Towel/Curved |
| Field Reversible |
Yes |
| Accepts Custom Overlay Panel |
No |
| Cooling System |
| Type |
Compressor |
| Defrost System |
Manual |
| Front Ventilation |
Yes |
| Controls |
| Adjustable Thermostat |
Yes |
| Digital |
Yes |
| Electrical |
| Electrical Requirements |
115v/60hz |
| Running Amps |
1.7 A |
Warranty:
LABOR - 12 MONTHS
LIMITED ONE YEAR WARRANTY
For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
PARTS - 60 MONTHS
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:
For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
ADDITIONAL DETAILS
WHAT IS NOT COVERED:
- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
Shipping & Returns:
Cancellations & Refunds: Outdoor Furniture Supply prides itself on having one of the best return policies in the industry. Cancel any time before your order has shipped, completely free of charge (exceptions apply, including custom made orders).
Call 858-298-2371 or email sales@outdoorfurnituresupply.com
Frequently Asked Questions
When will I know my order has shipped?
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment. If, for some reason, there is a delay in stock, we will contact you before accepting payment.
When will my order ship?
If your order is in stock and we process the charges to your credit card, it will ship within 2-5 business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@outdoorfurnituresupply.com.
No Shipping outside the lower 48 in USA.
If you have questions regarding anything below, please send an email to sales@outdoorfurnituresupply.com or call us at 858-298-2371
Cancellations & Refunds: At Outdoor Furniture Supply, we pride ourselves on having the best return policies in the industry. Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below).
If you have questions, please send an email to sales@outdoorfurnituresupply.com or call us at 858-298-2371
Cancellations (Before Order Ships)
If you need to cancel an order, please contact us as soon as possible so we can refund you in full before your order leaves the warehouse. Reach agents during business hours at 858-298-2371, the chat in the bottom right, or email sales@outdoorfurnituresupply.com any time.
Cancellations of Custom Orders
Custom or made to order products cannot be canceled or refunded as these products are put into production specifically for your order.
These units, are custom made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us.
All sales are final for Custom made and Made-to-order products.
Refunds and Returns
If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes.
Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product.
Due to drastically increasing LTL/freight shipping costs, any outright returns will incur 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.
Shipping Times
We promise to do our best to get your order to you as soon as possible. We provide estimated shipping times on the product pages based upon what our suppliers and freight companies tell us, and those estimated shipping times may change or vary without notice (Due to supply chain issues, the steel mills behind on making metal, the manufacturers delayed because of the mills, the overwhelmingly demand on shipping, factory/warehouse and dock workers and so on).
Order delays have proven to be unavoidable and outside of Outdoor Furniture Supply's control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times. We thank you for your business and appreciate your patience.
Warranty
Warranties vary depending upon the manufacturer - see individual product pages for details. Warranty damages occur over time and from use. If an item was damaged upon arrival, and not reported within 30 days, that is not a warranty claim.
Contact sales@outdoorfurnituresupply.com for any questions.
BY USING THE SITE, YOU AGREE TO THESE TERMS OF USE; IF YOU DO NOT AGREE, DO NOT USE THE SITE.
Our Shipping Partners:
