Kegco 20" Wide Cold Brew Coffee Dual Tap Black Kegerator

Kegco 20" Wide Cold Brew Coffee Dual Tap Black Kegerator

 The Kegco HBK1XB-3K Triple Faucet Home Brew Kegerator includes everything you need to dispense your own home brewed beer, including three brand new 5 gallon ball lock kegs! We've thought of everything - this kit includes a Kegco Exclusive 14" Tall Stainless Steel Three Faucet Draft Beer Tower, three sets of Ball Lock Keg Couplers, a Commercial Grade Double Gauge CO₂ Regulator with a 3-way Air Distributor and three 304 Grade Stainless Steel Home Brew Kegs with rubber handles. All in a durable commercial grade beer dispenser that is designed to stand up to heavy use and consistently deliver cold draft beer, pour after pour!

4" locking casters make this beer dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your beer is cold all the way up to the faucet. It comes with a Kegco Exclusive 14" tall air-cooled 3" diameter draft tower, so if your direct draw will be provided by your beer distributor, you're all set.

Features:

• Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish
  This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
• Includes Commercial Grade Double Gauge CO₂ Regulator with 3-way Air Distributor
  This regulator works with any CO₂ tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO₂ pressure is inside of the keg. The side gauge measures the remaining volume of CO₂ in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver. A 3-way air distributor is included, allowing you to aspirate three kegs off of one CO₂ tank and turn off any lines that are not being used.
• Includes four 5 foot, 5/16 Inch I.D. Blue Air Line Assemblies with Worm Drive Clamps
  This 5 foot length of 5/16" I.D. Blue Air/CO₂ Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver. One air line goes from the regulator to the distributor and three go from the distributor to the couplers.
• Includes Three Complete Sets of Ball Lock Home Brew Keg Taps
  The complete ball lock home brew keg tap set includes both a gas in and beer out couplers for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
• Includes a Kegco Exclusive 14" Tall, 3" Diameter Brushed Stainless Steel Three Faucet Draft Tower
  This NSF-approved tower is a 3" diameter triple faucet metal draft tower made of brushed stainless steel. It comes complete with three stainless steel faucets and three 5 foot, 3/16 inch I.D. clear beer lines. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers.
• Includes three brand new 5 Gallon Ball Lock Home Brew Kegs
  Made of durable and sanitary 304 grade stainless steel, these Cornelius Pepsi kegs have a permanently molded rubber bottom skirt and top handle for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance, and the stainless steel lid fastens tightly to the body and includes a pressure release valve.
• All dispensing accessories are UL recognized components
• Continuous Cold Air Channeled Through Tower to Ensure Cold Product
• Heavy-Duty Stainless Steel Top
• Built-In Drip Tray with Drain
• Stainless Steel Interior Walls and Ceiling
• Rubber Floor Mat prevents damage to interior
• Magnetic Gasket Provides Positive Door Sealing
• Self-Closing Door with Lock
• Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
• CFC-Free Foamed-in-Placed Polyurethane Insulation
• Knockout for Remote CO₂ or Nitrogen Tank
• Black Finish
• ETL abd ETL Sanitation Listed for Commercial Use
• Maximum Ambient Temperature: 90 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
• 
  

Specifications:

Warranty:

LABOR - 12 MONTHS

LIMITED ONE YEAR WARRANTY

For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.

PARTS - 60 MONTHS

LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:

For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.

ADDITIONAL DETAILS

WHAT IS NOT COVERED:

• Content losses of food or other, due to spoilage.
• Incidental or consequential damages.
• Parts and labor costs for the following will not be considered as warranty:
  • Door springs, and/or frames.
  • Inner door panels, door rails and/or door supports.
  • Light bulbs and/or plastic housing.
  • Plastic cabinet liners.
  • Punctured evaporator that voids the warranty on the complete sealed system.
  • Repairs performed by unauthorized servicers.
  • Shipping and handling costs associated with the replacement of the unit.
  • Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
  • Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
  • Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
  • Replacement of house fuses or resetting circuit breakers.
• Failure of the product if it is used for other than its intended purpose.
• This warranty does not apply outside the Continental USA.

Shipping & Returns:

Cancellations & Refunds: Outdoor Furniture Supply prides itself on having one of the best return policies in the industry. Cancel any time before your order has shipped, completely free of charge (exceptions apply, including custom made orders). 

Call 858-298-2371 or email sales@outdoorfurnituresupply.com

Frequently Asked Questions

When will I know my order has shipped?

As soon as you place your order, you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorized your credit card for the purchase.  As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail.  If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment. If, for some reason, there is a delay in stock, we will contact you before accepting payment.

When will my order ship?

If your order is in stock and we process the charges to your credit card, it will ship within 2-5 business days from the date of your order.  We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at sales@outdoorfurnituresupply.com.

No Shipping outside the lower 48 in USA.

If you have questions regarding anything below, please send an email to sales@outdoorfurnituresupply.com or call us at 858-298-2371

Cancellations & Refunds: At Outdoor Furniture Supply, we pride ourselves on having the best return policies in the industry. Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below). 

If you have questions, please send an email to sales@outdoorfurnituresupply.com or call us at 858-298-2371

Cancellations (Before Order Ships)

If you need to cancel an order, please contact us as soon as possible so we can refund you in full before your order leaves the warehouse. Reach agents during business hours at 858-298-2371, the chat in the bottom right, or email sales@outdoorfurnituresupply.com any time. 

Cancellations of Custom Orders

Custom or made to order products cannot be canceled or refunded as these products are put into production specifically for your order. 

These units, are custom made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us. 

All sales are final for Custom made and Made-to-order products.

Refunds and Returns

If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes. 

Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product. 

Due to drastically increasing LTL/freight shipping costs, any outright returns will incur 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product. 

Shipping Times

We promise to do our best to get your order to you as soon as possible.  We provide estimated shipping times on the product pages based upon what our suppliers and freight companies tell us, and those estimated shipping times may change or vary without notice (Due to supply chain issues, the steel mills behind on making metal, the manufacturers delayed because of the mills, the overwhelmingly demand on shipping, factory/warehouse and dock workers and so on). 

Order delays have proven to be unavoidable and outside of Outdoor Furniture Supply's control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times. We thank you for your business and appreciate your patience. 

Warranty

Warranties vary depending upon the manufacturer - see individual product pages for details. Warranty damages occur over time and from use. If an item was damaged upon arrival, and not reported within 30 days, that is not a warranty claim.

Contact sales@outdoorfurnituresupply.com for any questions.

BY USING THE SITE, YOU AGREE TO THESE TERMS OF USE; IF YOU DO NOT AGREE, DO NOT USE THE SITE.

Our Shipping Partners: