Kegco 24" Wide Single Tap Black Kegerator
Introducing the K209B-1NK Keg Beer Cooler from Kegco! This high-quality beer keg dispenser stores your kegs in a sleek all-black cabinet and includes a Kegco Exclusive 14" tall single tap draft beer tower. It has a large interior that can easily accommodate one full size, pony, or quarter slim keg, two 5 gallon commercial kegs along with one 5 gallon home-brew keg, or up to three 5 gallon home-brew kegs, and the stainless steel interior floor plate provides extra durability by displacing the weight of the kegs evenly over the floor of the cabinet. When you aren't using this keg refrigerator to dispense beer, the two included adjustable wire shelves allow you to convert the unit into a regular all-refrigerator or beverage center to provide additional refrigerated storage space.
The Kegco K209B-1NK Beer Keg Cooler has been specially designed to be quiet and energy efficient enough for home use. Easy-roll casters allow you to move this kegerator from room to room wherever and whenever you need it, and the casters lock to prevent the unit from rolling again once you have it where you want it. The recessed drip tray has a plastic grill that can be taken out and cleaned in the dishwasher, making the mess of sticky dried beer a thing of the past. An attractive and easy-to-install chrome safety rail also helps to keep mess to a minimum by preventing your mugs and glasses from sliding off and breaking.
- MDK-209B-01 Keg Beer Refrigerator and Single Tap Draft Beer Dispense System
Includes a brand new 5 lb. Aluminum CO2 Tank
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Dual Gauge CO2 Regulator
The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
This standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.
Includes D system lever handle keg coupler that can tap all domestic kegs
This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
Includes a Kegco Exclusive 14" Tall, 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. The tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers that allow you to easily fill tall growlers and pint glasses.
- All dispensing accessories are UL recognized components
- Converts to refrigerator 2 full-width wire shelves
- Large enough to hold all full size kegs (Including Coors, Miller and many additional brands)
- Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) and 1/6 barrels (5gal)
- Matte black cabinet and door
- Thermostatic temperature control keeps temperature in range of 35°F-42°F
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Easy roll casters for mobility
- Removable built-in drip tray with grill to collect spills
- Chrome guard rail to protect your mugs and glasses from sliding off
- Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
- Plugs into standard home outlet
- Adjustable mechanical temperature control (easily accessed at the back of the unit)
- 25% more energy efficient design saves you money each month!
- CSA Listed
|Compressor (Parts Only)
|Keg Storage Capacities
|Full Size / 1/2-Barrel
|Pony Size / 1/4-Barrel
|5 gal. Ball/Pin Lock Keg
|5-Liter / Mini Keg
|Draft Beer Tower
|Number of Faucets
|Color / Material
|Number of Doors
|Accepts Custom Overlay Panel
LABOR - 12 MONTHS
LIMITED ONE YEAR WARRANTY
For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual. Kegco will provide you with a reasonably similar replacement product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days. All Kegco Appliances of 3.5 cubic feet capacity or less must be brought/sent to the appliance service shop for repair.
PARTS - 60 MONTHS
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY:
For the second through the fifth year from date of original purchase, Kegco Products will provide a replacement compressor free of charge due to a failure. You are responsible for the service labor and freight charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Cost to move the appliance to the servicers’ shop and back to the user's home, as may be required, are the user's responsibility.
WHAT IS NOT COVERED:
- Content losses of food or other, due to spoilage.
- Incidental or consequential damages.
- Parts and labor costs for the following will not be considered as warranty:
- Door springs, and/or frames.
- Inner door panels, door rails and/or door supports.
- Light bulbs and/or plastic housing.
- Plastic cabinet liners.
- Punctured evaporator that voids the warranty on the complete sealed system.
- Repairs performed by unauthorized servicers.
- Shipping and handling costs associated with the replacement of the unit.
- Service calls that do not involve defects in material or workmanship such as customer education, door reversal, or proper installation.
- Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service call to remote areas, including the State of Alaska.
- Service calls that are related to external problems, such as abuse, misuse, inadequate electrical power, accidents, fire, floods, or acts of God.
- Replacement of house fuses or resetting circuit breakers.
- Failure of the product if it is used for other than its intended purpose.
- This warranty does not apply outside the Continental USA.
Shipping & Returns:
Cancellations & Refunds: Outdoor Furniture Supply prides itself on having one of the best return policies in the industry. Cancel any time before your order has shipped, completely free of charge (exceptions apply, including custom made orders).
Call 858-298-2371 or email firstname.lastname@example.org
Frequently Asked Questions
When will I know my order has shipped?
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment. If, for some reason, there is a delay in stock, we will contact you before accepting payment.
When will my order ship?
If your order is in stock and we process the charges to your credit card, it will ship within 2-5 business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at email@example.com.
No Shipping outside the lower 48 in USA.
If you have questions regarding anything below, please send an email to firstname.lastname@example.org or call us at 858-298-2371
Cancellations & Refunds: At Outdoor Furniture Supply, we pride ourselves on having the best return policies in the industry. Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below).
If you have questions, please send an email to email@example.com or call us at 858-298-2371
Cancellations (Before Order Ships)
If you need to cancel an order, please contact us as soon as possible so we can refund you in full before your order leaves the warehouse. Reach agents during business hours at 858-298-2371, the chat in the bottom right, or email firstname.lastname@example.org any time.
Cancellations of Custom Orders
Custom or made to order products cannot be canceled or refunded as these products are put into production specifically for your order.
These units, are custom made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us.
All sales are final for Custom made and Made-to-order products.
Refunds and Returns
If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes.
Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product.
Due to drastically increasing LTL/freight shipping costs, any outright returns will incur 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.
We promise to do our best to get your order to you as soon as possible. We provide estimated shipping times on the product pages based upon what our suppliers and freight companies tell us, and those estimated shipping times may change or vary without notice (Due to supply chain issues, the steel mills behind on making metal, the manufacturers delayed because of the mills, the overwhelmingly demand on shipping, factory/warehouse and dock workers and so on).
Order delays have proven to be unavoidable and outside of Outdoor Furniture Supply's control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times. We thank you for your business and appreciate your patience.
Warranties vary depending upon the manufacturer - see individual product pages for details. Warranty damages occur over time and from use. If an item was damaged upon arrival, and not reported within 30 days, that is not a warranty claim.
Contact email@example.com for any questions.
Our Shipping Partners: