Mr. Steam CU (Digital 1) 24 kW (24000 W) Steam Shower Generator Package with Digital 1 Control
This high-efficiency, low-maintenance steam generator can power up to two steam rooms measuring up to 1000 cubic feet (CF). The C1000 is constructed of durable stainless-steel casing for years of safe and efficient operation. The unit is vertically built to fit compact narrow mechanical rooms for easy installation and accessibility. The Mr. Steam C1000 commercial steam shower generator includes a 24kW stainless-steel heating element and a National Board registered pressure vessel wrapped in insulation. The unit comes with an auxiliary manual reset, low-water cutoff to ensure safety. The C1000 steam room boiler complies with all UL, ASME, and CSA standards. Mr. Steam CU Series generators are designed for reliable, around-the-clock use in health clubs, day spas, hotels, and other commercial wellness centers. CU Series units are pre-tested and delivered factory-wired to assure that each unit is working perfectly.
The unit comes with an Automatic Blowdown System which performs daily cleansing of the generator tank to prevent sediment build-up. Additionally, we recommend the addition of an effective water treatment system to protect the longevity of your generator. The C1000 generator comes complete with the Digital 1 control package which maintains pre-set temperatures and provides consistent steam production. The package includes a factory-installed digital control with a sensor guard, CU steam head, steam solenoid valve, and all necessary operating equipment. The AromaSteam steam head allows you to integrate essential oil aromas into the steam shower. The Mr. Steam C1000 is available in 208V, 240V, and 480V three-phase (3-PH) configurations, and 208V, 240V single-phase (1-PH) configurations./p> All Mr. Steam CU Series steam generators are designed, engineered, and constructed in the USA.
C1000 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valve
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Installation and operation manual
- Limited warranty
|Minimum Cubic Feet
|Maximum Cubic Feet
|Water Supply Connection
|Generator Steam Line Connection
|Steam Head Connection
|Safety Relief Valve Connection
|Safety Relief Valve PSIG
|Control "Rough In" Cut Out
|3-1/2" x 3-1/2"
|Control Sensor Cable
|30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable
|Control Sensor "Rough In" Cut Out
|Generator Control Connection
|6 Position Terminal Block
|Generator Control Cable
|6" Long, 4 Conductors, 16 AWG
Limited Lifetime Warranty for MrSteam® Residential Steambath Generators
MrSteam® warrants that every MrSteam Residential Steambath Generator (“Generator”) will be free from defects in materials and workmanship for its lifetime. MrSteam will repair or replace (at its option) a Generator which fails to conform to this warranty.
Warranty Service within 2 years from date of purchase
If the warranty claim is made within two years from the date of purchase of the Generator, MrSteam will provide free in-home warranty service, parts and labor.
Warranty Service after 2 years from date of purchase
If the warranty claims is made after two years from the date of purchase of the Generator, MrSteam will provide a lifetime warranty on parts. To return a Generator to MrSteam, a Return Authorization Number (RMA) must be issued. An RMA and other required information must be written on the return packaging as instructed by MrSteam. If MrSteam issues an RMA, MrSteam will pay the freight charges to ship the Generator to MrSteam and for MrSteam to return a repaired or replacement Generator.
If in the judgment of MrSteam the defect is not covered by this warranty, the costs of any in-home service as well as the costs of repair or replacement together with all freight charges will be the responsibility of the claimant.
To obtain warranty service, please call 1-800-76-STEAM (East Coast) or 1-800-72-STEAM (West Coast).
Terms, Conditions, and Exclusions
This warranty does not apply to a Generator that is or has been:
- Used in any non-residential setting.
- Damage by lightning, electrical storms or electrical surges or spikes.
- Damaged by reason of local water conditions.
- Installed or operated other than in accordance with the MrSteam supplied Installation, Operation and Maintenance Manual.
- Purchased from an unauthorized online e-tailer seller. For a list of authorized e-tailers, go to: mrsteam.com or call (800) 767-8326.
This warranty applies to Generators purchased and installed in the United States and Canada only. This warranty does not cover any costs to remove or reinstall the Generator. All freight charges must be preapproved by MrSteam. This warranty is for the Generator only. See the applicable warranty for MrSteam controls and accessories. This warranty applies only to Generators purchased on or after January 1st, 2012.
THE FOREGOING IS IN LIEU OF OTHER EXPRESS AND ALL IMPLIED WARRANTIES. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN AND SPECIFICALLY LIABILITY FOR ANY BREACH OF ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS EXCLUDED. THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW NOTWITHSTANDING THE PREVIOUS SENTENCE (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) SHALL IN NO EVENT EXCEED ONE YEAR. IN NO EVENT SHALL MRSTEAM BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF ANY MRSTEAM PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights. You may have other rights, which vary from state to state.
REGISTER YOUR MRSTEAM WARRANTY
Thank you for choosing MrSteam! Here is where you can download the warranty for your MrSteam product as well as register the warranty on your purchase.
To download a copy of a warranty, click on the MrSteam product category you have purchased:
To register a MrSteam product, simply complete the form on this page and you'll receive confirmation of your submission.
By completing this form, not only will MrSteam be better able to serve you, but we'll have information that allows us to continue to improve our products and our communications with you.
Please note that all of your information will be treated with the highest confidentiality.
Complete the form here
Shipping & Returns:
Cancellations & Refunds: Outdoor Furniture Supply prides itself on having one of the best return policies in the industry. Cancel any time before your order has shipped, completely free of charge (exceptions apply, including custom made orders).
Call 858-298-2371 or email email@example.com
Frequently Asked Questions
When will I know my order has shipped?
As soon as you place your order, you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase. As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment. If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail. If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment. If, for some reason, there is a delay in stock, we will contact you before accepting payment.
When will my order ship?
If your order is in stock and we process the charges to your credit card, it will ship within 2-5 business days from the date of your order. We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out. If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at firstname.lastname@example.org.
No Shipping outside the lower 48 in USA.
If you have questions regarding anything below, please send an email to email@example.com or call us at 858-298-2371
Cancellations & Refunds: At Outdoor Furniture Supply, we pride ourselves on having the best return policies in the industry. Cancel your order any time before it ships completely free of charge (exceptions apply such as custom orders, see below).
If you have questions, please send an email to firstname.lastname@example.org or call us at 858-298-2371
Cancellations (Before Order Ships)
If you need to cancel an order, please contact us as soon as possible so we can refund you in full before your order leaves the warehouse. Reach agents during business hours at 858-298-2371, the chat in the bottom right, or email email@example.com any time.
Cancellations of Custom Orders
Custom or made to order products cannot be canceled or refunded as these products are put into production specifically for your order.
These units, are custom made to your specification or created once you order. Once you place your order they start building your unit. Your warranty will guarantee you a fully functional and operational product. If it is not clear whether your order is custom or made to order, please message or call us.
All sales are final for Custom made and Made-to-order products.
Refunds and Returns
If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes.
Not all orders are available for return once they have shipped. We order our products directly from the manufacturer. Therefore, if the manufacturer will not permit us to return a product, we cannot offer you a return. This often varies on a case-by-case basis; please reach out to us if you would like specific information on your brand and/or product.
Due to drastically increasing LTL/freight shipping costs, any outright returns will incur 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.
We promise to do our best to get your order to you as soon as possible. We provide estimated shipping times on the product pages based upon what our suppliers and freight companies tell us, and those estimated shipping times may change or vary without notice (Due to supply chain issues, the steel mills behind on making metal, the manufacturers delayed because of the mills, the overwhelmingly demand on shipping, factory/warehouse and dock workers and so on).
Order delays have proven to be unavoidable and outside of Outdoor Furniture Supply's control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times. We thank you for your business and appreciate your patience.
Warranties vary depending upon the manufacturer - see individual product pages for details. Warranty damages occur over time and from use. If an item was damaged upon arrival, and not reported within 30 days, that is not a warranty claim.
Contact firstname.lastname@example.org for any questions.
Our Shipping Partners: